Emulsion Chopped Strand Mat

Emulsion Chopped Strand Mat Type 1: Powder Type 2: Emulsion.

Emulsion Chopped Strand Mat.

 

 

Fiberglass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder.

Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins.

The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roof sheet, Autonitive parts, bathroom equipment and cooling towers.

  

Product List.

Type	Density g/m2	Moisture Content %	Breakage Strength (N)	Binder Content %	Bond type	Roll width (mm)
EMC100	100	≤0.2	≥30	15±2	Emulsion	Max.3300mm, Min.150mm Usual width: 1040,1250,1270,1450,1550,
EMC120	120		≥40	12±2
EMC150	150		≥50	6±1
EMC180	180		≥55	5±1
EMC200	200		≥60	4.5±0.5
EMC225	225		≥60	4.5±0.5
EMC250	250		≥70	4±0.5
EMC300	300		≥70	3.8±0.5
EMC380	380		≥80	3.5±0.5
EMC450	450		≥90	3.3±0.5
EMC600	600		≥100	3.3±0.5
EMC600	900		≥150	3.3±0.5

Remark: The above parameters are only normal practice, the products with users specification can be made.

Package: Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets.

Deposited: Chopped Strand Mat should be stored in dry, cool, clean and rainproof area. Recommended temperature range of storage is between 15-30 and relative humidity between 40%-70%.

Emulsion Chopped Strand Mat